Harris Tech Audio - click to return to the home page.

 


Technical Note 02
How to Manually Start the X•over 3 Pro Setup Program

 
Sometimes the setup program on the X•over Pro CD-R disc may not auto-start. This could be because the "autorun" feature of the DVD/CD drive of the computer is turned off. It is easy to start the setup program manually. Here are a couple of methods:


Method 1: Manually Start "Autorun"

  1. Insert the X•over Pro installation disc into the DVD/CD drive of your computer.
     
  2. Launch "My Computer" or the "Windows Explorer" and navigate to the icon representing your DVD/CD drive where you inserted the installation disc.
     
  3. Right-click on the drive icon and select "AutoPlay" from the pop-up menu. This should start the setup program on the disc. Note: If the "AutoPlay" command is missing, then proceed to "Method 2" below.

Method 2: Manually Start the "Setup" Program on the Disc

  1. Select the "Run" command in the Windows "Start" menu. The "Run" dialog shown below will appear:
    Enter the appropriate command in the

     
  2. If the installation disc contains only X•over 3 Pro, enter the drive letter of your DVD/CD drive followed by ":\setup-x\setup.exe" in the "Open" input box. Do not include the quotation marks. If the drive letter of your DVD/CD drive is "d" then the full text would be "d:\setup-x\setup.exe".
     
    If the installation disc contains both X•over 3 Pro and BassBox 6 Pro, enter the DVD/CD letter followed by ":\setup-z\setup.exe".
     
  3. Click the "OK" button of the "Run" dialog and the setup program on the disc should start.

 

Technical Notes for
all of our products:

 
BassBox 6 Pro
BassBox 6 Lite
X•over 3 Pro
Typeface Collection
BassBox 5.1
X•over 1.0-2.x
 

Technical Support for the Woofer Tester 2
by Smith & Larson Audio:
 
  FAQs
  Forum
  Contacts

Copyright © 2022 by Harris Technologies, Inc. All rights reserved worldwide.